Low cost manual turning on a quality built
Taiwanese lathe.
SWING OVER BED 356mm
BETWEEN CENTRES 750mm
SPINDLE BORE 38mm
| Swing over bed | 356 mm |
|---|---|
| Swing in gap | 515 mm |
| Gap in front of face plate | 135 mm |
| Swing over cross slide | 220 mm |
| Distance between centres | 750 mm |
| Cross slide travel | 165 mm |
| Main spindle | |
| Type of side nose | D 1-4 |
| Main spindle bore | 38 mm |
| Taper of spindle sleeve | MT4 x MT3 |
| Spindle speeds | 50-2000 rpm |
| Number of spindle speeds | 12 |
| Carriage | |
| Compound slide travel | 90 mm |
| Max size cutting tool | 22 mm |
| Bed | |
|---|---|
| Bed Width | 190 mm |
| Tailstock | |
| Quill diameter | 40 mm |
| Quill travel | 110 mm |
| Taper of centre | MT3 |
| Threading and Feeding | |
| Pitch/diameter | 6 mm/25 mm |
| Metric pitch cutting | 32 (0.4-7 mm) |
| Whitworths thread cutting | 32 (4-56TPI) |
| Module pitches cutting | 32 (0.4-7 mm) |
| Diametrical pitches cutting | 32 (8-112 DP) |
| Range of longitudinal feeds/rev | 0.067-1.458 |
| Ranges of cross feeds/rev | 0.033-0.742 |
| Power | |
| Main drive motor | 3 hp |
| Weight | 800 kg |