Fully equipped and ready to go.
SWING OVER BED 330mm
BETWEEN CENTRES 1000mm
FULLY EQUIPPED
| Swing over bed | 390 mm |
|---|---|
| Swing in gap | 610 mm |
| Gap in front of face plate | 150 mm |
| Swing over cross slide | 240 mm |
| Distance between centres | 1250 mm |
| Cross slide travel | 230 mm |
| Main spindle | |
| Type of side nose | D 1-6 |
| Main spindle bore | 54 mm |
| Taper of spindle sleeve | MT6 x MT4 |
| Spindle speeds | 25-2000 rpm |
| Number of spindle speeds | 16 |
| Carriage | |
| Compound slide travel | 120 mm |
| Max size cutting tool | 25 mm |
| Bed | |
|---|---|
| Bed Width | 270 mm |
| Tailstock | |
| Quill diameter | 58.5 mm |
| Quill travel | 155 mm |
| Taper of centre | MT4 |
| Threading and Feeding | |
| Pitch/diameter | 6 mm/31.75 mm |
| Metric pitch cutting | 39 (0.2-14 mm) |
| Whitworths thread cutting | 45 (2-72TPI) |
| Module pitches cutting | 18 (0.3-3.5 mm) |
| Diametrical pitches cutting | 21 (8-44 DP) |
| Range of longitudinal feeds/rev | 0.03-0.4 |
| Ranges of cross feeds/rev | 0.01-0.13 |
| Power | |
| Main drive motor | 7.5 hp |
| Weight | 1400 kg |
Newell C80 DRO
Absolute/Incremental Operation. Inch/Metric conversion. Zero approach warning. Data recall. Data hold. Radius/Diameter readings. Centre find. PCD calculator. Line hole routine. Tool offsets. Taper calculator. Home reference. Linear error compensation. Segmented error compensation. Memory back-up. Self diagnostics. Encoder failure alert. Switchable resolutions by axis. Sleep mode.