XYZ TC 400

Price on request

With a bar capacity of 78mm, turning capacity of 300mm diameter and with a spindle motor of 45hp the XYZ TC 400 has a real hunger for metal removal.

  • 43 HP / 32kW SPINDLE
  • 300 mm CHUCK
  • 91 mm SPINDLE BORE
  • 78 mm BAR CAPACITY
  • 3,300 rpm SPINDLE

Call 01823 674200

Category:

Product Description

Standard Equipment

  • Hydraulic 300mm 3 Jaw Chuck (380mm optional).
  • Automatic Tool Setting Arm.
  • Swarf Conveyor & Bin.
  • VDI Turret.
  • Hydraulic Tailstock.
  • Through Tool Flood Coolant.
  • Remote Electronic Handwheel.
  • USB Port.
  • Compact Flash Card Slot.
  • Networking.

Optional Equipment

  • 380mm Hydraulic Chuck
  • Collet Chuck.
  • Bar Puller.
  • Barfeed Units.
  • Offline Programming.

Specifications

Power chuck diameter 300mm (380mm optional)*
Maximum swing 600mm
Swing over carriage cover 410mm
Maximum turned diameter 400mm
Maximum turned length 600 mm
X axis travel 275mm
Z axis travel 650mm
Spindle centre height from floor 1,020mm
Spindle nose A2-8
Spindle bore 91mm
Bar capacity 78mm
Spindle front bearing internal dia 130mm
Max spindle speed 3,300 rpm
Spindle motor 43 HP / 32kW
Min spindle speed for full power 1,500 rpm
X & Z axis rapid traverse rate 10 & 20 m/min
X axis slideway configuration Hardened Box Ways
Y axis slideway configuration Hardened Box Ways
Ballscrew diameter (X & Z) 40 x 45mm
Servo motors (X,Z & turret) X: 2.29Kw, 11Nm
Z: 3.3Kw, 16Nm
Turret diameter 450mm
Tool type VDI 40
Number of tool stations 12
Turning tool shank dimensions 25 x 25mm
Max. boring bar diameter 40mm
Tail stock quill taper MT5
Quill diameter and travel 95 x 125mm
Max. quill thrust 2300 kg
Coolant tank capacity 115 litre
Coolant pump delivery 16 l/min @ 2.5 Bar
Machine weight 5,700 kg
Footprint W x D x H approx 3800x 2060 x 2260mm

Control

Siemens 828D ShopTurn Control

Siemens 828D Control

Introducing Siemens and the ‘JobShop Concept’. As an experienced machinist you instinctively know the machining stages you will need to go through to make any given component. It’s these stages that form the basis of the ‘JobShop Concept’. Using easy to understand ‘prompts’ the control helps you to create a ‘work plan’ of the machining stages in just the same way and the control does all the coding in the background. Simply watch it all unfold on the 10.4” TFT colour screen in plan, 3 planes or full 3D, switching views as you go.

Siting Requirements

TC400

XYZ TC400 Siting Requirements  XYZ TC400 Siting Requirements