fbpx

XYZ ProtoTRAK 2-OP

Price on request

The XYZ 2-OP, a portable VMC designed and built to liberate your more expensive machine tools from the every day drudgery of ”second operations”. The XYZ 2-OP features the ”easy to use” ProtoTRAK® control.

The XYZ 2-OP is so easy to use that all workshops will be able to achieve ”cell set ups” quickly and easily improving production without the need to employ extra skilled labour.

Call 01823 674200

Categories: ,

Product Description

The most expensive item on any machine shopfloor is its manpower!

The capital cost of a machine tool should be amortised over its reasonable life of say 7-10 years so, a £50,000 machine would cost £5,000 to £7,000 per year. However, an operator costs around £40,000 a year, every year, so that person needs to be kept busy. It is here that the XYZ 2-OP comes into its own. At a cost of around £25,000 the XYZ 2-OP increases productivity by adding a spindle and creating a cell operated by one person, thereby maximising the available labour hours and reducing manufacturing costs.

Everyone knows that in a production environment making masses of the same item that running a cell is the most efficient use of labour. But in a subcontract environment if the job is only a few hundred components or a few days’ work it’s not worth setting up a cell moving heavy machines around. 2-OP addresses this issue and allows you to quickly set up a cell so smaller batches or where a job might only last 3 or 4 days can be machined with “cell” efficiency dramatically reducing the time on the whole job.

If you’re using a ProtoTRAK or any machine, quite a lot of the “expensive” operator time can be just waiting for a machining cycle to finish. With 2-OP they can use this time productively and almost free. The XYZ 2-OP portability addresses this issue and allows for this quicker production.

With a footprint of only 775mm x 1380mm the 2-OP can easily fit into the tightest of spaces.

See the 2-OP in action

Options to fit your exact needs

XYZ 2-OP Vice – Special model for the XYZ 2-OP (recommended).

Fixture plate – Precision plate with primary liners, 457mm x 381mm.

Fixture plate set up – Includes liners, fence, and vice stop assembly.

Vice stop – Includes mag base and 25.4, 50.8 and 76.2mm extensions.

Tool holders – BT30, eight pieces of assorted sizes.

Pull Studs – 30 taper.

Ball lock liners – set of 8
For fixture plates. High and lower precision for use with primary and secondary locating holes in the XYZ 2-OP table.

Ball lock clamping devices – Available in sets of four.

Mobile tool cart – Convenient and easy to move.

  • ProtoTRAK® TMX 3 Axis CNC control.
  • Optimised digital servo’s.
  • 8 Station Toolchanger.
  • 6000 RPM Spindle.
  • Jergens ball lock table.
  • Pallet truck.
  • Rigid Tapping.
  • Flood coolant.
  • Washdown coolant.
  • Worklight.
  • Auto Lubrication.
  • Pull Studs.
  • USB port.
  • Networking.
  • Kurt modified vice.
  • Fixture plate for vice with fence and magnetic stops.
  • Plain fixture plate.
  • Ball lock clamping devices.
  • Primary and secondary liners for fixture plates.
  • Tooling cart.
  • Speed indexer.
  • 4th axis with controller.
  • Offline programming (free download).
  • External USB drive.
X Travel355 mm
Y Travel305 mm
Z Travel455 mm
Table size457 x 381 mm
Spindle to table70 – 525 mm
Rapid feed XYZ axis15 M/min
Max table load250 kg
T slot size16 mm
T slot number & pitch4 @ 63 mm
Spindle speed50-6000 rpm max
Spindle motor3 hp
Spindle taperBT 30
Tool magazine capacity8 station
Max tool diameter50 mm
Machine weight1100 kg
Footprint W x D x H775 x 1,380 x 2,520 mm